2007-2009+ 6.7 L Cummins MM3 Tuning is here !
What is MM3?
MM3 is an open source software that allows us to install our custom calibrations directly to the flash device. It is also the only device that allows us to truly switch selectable parameters on the fly while you drive using “Real Time Groups” or “Real Time Parameters”. This allows certain switch positions to change operating characteristics of the motor as required. Call or message us for more details
5 Switch on the Fly Tunes
- Instantly switch tunes while driving
- Choose your switch option based on model year
- More consistent power delivery
- Easy installation instructions
- Worldclass technical support at your fingertips
Switch Between:
OPTIMIZED STOCK
- Maximum towing rating at all times
- Wider torque curve assists heavy loads
- + 0 RWHP, + 10 ft-lbs torque over stock
- EGTs managed by ECM temperature control
HEAVY TOW
- For towing from 8,000lbs up to Gross Vehicle Weight Rating
- Wider torque curve assists heavy loads
- + 30 RWHP, + 50 ft-lbs torque
- Exhaust temperatures monitored by MM3 device as well as backdowns instituted
LIGHT TOW
- For those towing below 8,000lbs
- Perfect balance of sport driving & functionality
- Designed for weekend tower, boats, small tractors, etc
- + 60 RWHP, + 80 ft-lbs torque
ECONOMY
- Maximum possible mile per gallon
- + 80 RWHP, +160 ft-lbs torque
- 480 RWHP range with a clean air filter
RACE
- Maxes out the factory fuel system
- +120 RWHP, +200 ft-lbs torque
- Recommend transmission tune to avoid premature wear
- If you drive responsibly, can use Performance as you would the Economy tune
MM3 Hardware Included
- Digitally monitor a wide array of PIDs in real time via proprietary Data link connection
- Switch your tunes on the fly by full control via a switch or monitor
- Data log your vehicle
- 3 inch touch display
- Twin CPU design reacts quickly to each request
- fast display start-up, ECM download, and PID refresh
Recommended Options
MM3 Exhaust Gas Temperature Probe
